Remove Screws - KTM 450 EXC-F Six Days 2019 Setup Instructions

3.11 Removing the seat
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
V00341-10
(All EXC‑F Six Days)
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
K00576-10
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
S01321-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–

Remove screws

–
Raise the rear of the seat, pull the seat back, and lift it off.
V00342-10
2
.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
p. 21)
1
.
WORK 3
1
.
p. 20)
25