Table of Contents
Advertisement
–
Mount reflector
3
plate
.
–
Mount the holding plate on the license plate bracket.
(EU/JP/CN)
–
Mount the license plate holder.
(US)
–
Bond the reflectors on the right and left side of the reflec-
tor holder.
–
Mount the reflector holder on license plate bracket.
–
Carefully loosen and remove the tension belt over the
swingarm.
Guideline
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the lower
triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the palette.
V00724-10
–
Remove radiator shield
V00725-10
–
Mount rubber dampers
–
Position engine guard. Mount and tighten the screws with the
distance sleeves.
Guideline
Screw, engine guard
F01347-10
Condition
Function KTM MY RIDE (optional) activated.
–
Remove screws
–
Take off the headlight mask.
F01348-10
1
2
with spring washers
on holding
4
.
5
on the engine guard.
M6
10 Nm (7.4 lbf ft)
6
.
SETUP 2
5
Hide quick links:
Advertisement
Table of Contents
