2 SETUP
12
–
Remove screw
–
Remove screw
–
Remove screw
E00489-10
–
Remove screws
–
Carefully pull the tail light cable out of the frame, paying
attention to the plug as you do so.
–
Take off license plate holder with tail light toward the rear.
S01416-10
–
Remove screws
–
Drill a hole at marking
E00491-10
bl
with the collar bushing.
bm
.
bn
with negative cable and contact disk.
bo
.
bp
and hang the tail light to the side.
C
to the size of the marking.