Remove Screws - KTM 125 XC-W 2018 Setup Instructions

3.1 Raising the motorcycle with a lift stand
3.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
3.3 Removing the seat
Note
Danger of damage The parked vehicle can roll away or fall
over.
–
Park the vehicle on a firm and level surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
401942-01
–
Secure the motorcycle against falling over.
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
with your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up
and secured with the rubber band.
401943-10
–

Remove screws

–
Raise the rear of the seat, pull the seat back, and lift it off.
V00342-10
1
1
.
3 WORK
to the ground
11