3 WORK
3.12
3.13
26
Mounting the seat
V00343-10
V00342-10
Disconnecting the negative cable of the battery
R01414-10
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
(EXC‑F EU/AU, EXC‑F Six Days EU)
–
Press and hold the kill switch
until the engine stops.
(All US models)
–
Turn the ignition key in the ignition lock to the position
while the engine is idling.
–
Remove the seat. (
p. 25)
Main work
–
Disconnect negative cable
1
.
M6
10 Nm (7.4 lbf ft)
while the engine is idling
1
of the battery.