KTM 450 EXC-F Six Days 2019 Setup Instructions page 30

3 WORK
3.16
28
F00138-10
Installing the battery
H00386-10
Main work
–
Disconnect negative cable
–
Pull back positive terminal cover
tive cable from the battery.
–
3
Remove screw .
–
4
Pull holding bracket forward and remove battery toward
the top.
Main work
–
Insert the battery into the battery compartment with the termi-
nals facing forward and secure with holding bracket
Battery (HJTZ5S-FP)
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
3
Connect positive cable
Guideline
Screw, battery termi-
nal
–
Slide positive terminal cover
–
4
Connect negative cable
Guideline
Screw, battery termi-
nal
A
Contact disks must be mounted under screws
6
cable sockets with the claws toward the battery termi-
nal.
Finishing work
–
Mount the seat. ( p. 26)
1
from the battery.
2
and disconnect the posi-
1
2
.
M6 10 Nm (7.4 lbf ft)
to the battery.
M5 2.5 Nm
(1.84 lbf ft)
7
over the positive terminal.
to the battery.
M5 2.5 Nm
(1.84 lbf ft)
5
.
and