–
Position turn signal on both sides, mount nuts with wash-
ers and tighten.
–
Position license plate lamp on the license plate holder,
and mount and tighten screws
–
Mount reflector
–
Pass cable through the license plate holder.
E00496-10
–
Position the license plate holder on the license plate sup-
port.
–
Join the plug-in connector of the license plate lamp.
–
Connect the plug-in connector of the left turn signal which
is marked red.
–
Connect the plug-in connector of the right turn signal
which is marked green.
–
Mount and tighten screws
E00497-10
–
Position the right footrest and pin.
Info
Only insert the pin to the extent that the spring can still
be mounted.
D02151-10
–
Position spring as shown.
D
Spring
S01395-10
bq
.
br
on license plate holder.
bo
.
E
engages in area
.
SETUP 2
15