2 SETUP
10
–
Mount the left hand guard.
–
Mount the right hand guard.
F01077-10
–
Secure the handlebar cushion with two cable ties.
–
Install front fender. (
–
Install the front wheel. (
–
Remove the battery. (
–
Recharge the battery. (
(All US models)
–
Install the headlight mask with the headlight. (
–
Install the battery. (
E00482-01
(EXC‑F EU/AU, EXC‑F Six Days EU)
–
Remove the fuel tank. (
–
Position the turn signal cable harness.
–
Insert the indicator lamp with the black and violet cable
colors into socket
S01393-10
–
Position the turn signal on the headlight mask on both
sides, mount nuts with washers and tighten.
–
Connect the plug-in connector of the right turn signal using
the black and brown cables of the turn signal cable har-
ness.
–
Connect the plug-in connector of the left turn signal using
the violet and brown cable colors of the turn signal cable
harness.
E00484-10
Info
Pay attention to where the brake line is routed when
doing so.
p. 24)
p. 24)
p. 27)
p. 29)
p. 28)
p. 30)
4
.
p. 20)