Connecting Your Device To Vuelink - Philips VueLink M1032A Service Booklet

Connecting your Device to VueLink

Supported Device Drivers
Free Analog Device Drivers
There are two different ways to connect your Device to VueLink:
• Connection via a Supported Device driver.
This uses one of the following device outputs:
– Analog
– RS-232 Digital
– Analog/Digital combination
• Connection via a Free Analog Device driver.
This only uses device analog outputs.
Supported Device Drivers are preconfigured in the VueLink module. A dedicated
ready-prepared VueLink cable is available for connecting the external device to the
module. (Please refer to page A-4 for cable part numbers).
Free Analog Device Drivers must be manually configured into the module at
installation. A Free Analog VueLink cable is available for connecting the Free
Analog external device to the VueLink module. One end of the cable is
unterminated and must be prepared for connection to the external device on-site.
(Please refer to page B-4 for cable option part numbers).
Connecting your Device to VueLink
9