Step 1: Ensure that all the necessary hardware is available
Note
Free Analog Device Information
(10 Minutes)
You will need:-
•
An M1032A #A02 VueLink Module
•
4m Free Analog (open end) cable M1032A #K6A or M1182A #K6A
or
2m Free Analog cable M1032A #K60 or M1182A #K60.
•
A connector to fit the Evita Analog Interface connector:
Standard 37 PIN DSUB connector (male)
Standard hood with snap adapter
This connector is provided locally by the hospital or by the manufacturer; it will not
be set up at SMO/SLI.
•
The Evita Analog Interface - This is an optional feature. If the Evita is not
equipped with this interface it needs to be ordered by the customer.
Dräger Evita Ventilator
159