Supported Device Information - Philips VueLink M1032A Service Booklet

Supported Device Information

Caution
Note
Supported Device Information
This appendix contains information about the supported devices that can be
connected to the VueLink module. The following information is provided for each
supported device:
• The part number of the corresponding device driver.
• The configuration settings required on the external device.
• The placement of the output connectors on the external device.
A cable matrix has also been compiled, detailing the cable part numbers for each
supported device.
Only use cables specified by Philips Medical Systems when connecting
supported devices to the VueLink module. Use of unauthorized or incorrect
cables may result in damage to supported devices and may cause incorrect
data to be displayed on the Philips patient monitor.
The configuration settings required on the external devices are detailed on the
following pages. Procedures on how to configure the external devices are not
provided. Configuration procedures can be found in the documentation supplied
with the external devices. Philips personnel are only responsible for configuring
Philips manufactured external devices.
The signal labels used on the Philips patient monitor may be different from those
given on the external device. The labels used on the Philips patient monitor are
listed in the Philips M1032A VueLink External Device Instructions for Use.
A1
15