Care Of Your Machine; Cleaning The Bobbin Area Oo; Cleaning The Hook Area And Feed Dog - ELNA EnVision 8006 Instruction Manual

53
Care of Your Machine
The Elna 8006 EnVision has been meticulously
designed and manufactured to give you a lifetime of
sewing pleasure. Do not store the machine in a high
humidity area, near a heat radiator or in direct
sunlight. The machine is self-lubricating, however, the
area around the bobbin and hook must be cleaned
each time the machine has had extensive use. Clean
the outside of the machine with a soft cloth and pure
soap.
Cleaning the Bobbin Area
Loose threads and dust may cause puckered stitches
and thread breakage during stitching. Check for lint
buildup after each garment is completed.
Press the up/down needle key until the needle is
raised. Unplug the machine before cleaning.
@ Remove the bobbin cover plate by sliding the
bobbin cover plate release button to the right.
@ Take out the bobbin, brush out dust and lint.
(You may also use a small vacuum cleaner.)
© Insert the bobbin and attach the bobbin cover
plate.
Cleaning the Hook Area and Feed Dog
@ Remove the presser foot, bobbin cover plate,
needle and bobbin. Remove the screw on the
left side of the needle plate with the
screwdriver supplied with the machine.
@) Remove the needle plate. Lift up the bobbin
case and remove it.