ELNA EnVision 8006 Instruction Manual page 44

5. Carefully lift inner hoop/template and fabric/
stabilizer and set them into the outer hoop. Tighten
screw on outer hoop. Check reference lines with
template and adjust accordingly. Fabric should be
held taut inside the hoop. Always pull fabric taut
respecting the fabric grain (vertical and horizontal).
6. Remove template.
7. The hoop turn key should be parallel to the hoop.
Position hoop on machine and place the prong into
the carriage. Lock the hoop into position by moving
the turn key clockwise.
41