How To Select Traditional Sewing Mode Uo; How To Select A Stitch; Ee Ccc Ccceeee Cece Eeetteeeneeetetetneesens - ELNA EnVision 8006 Instruction Manual

r
dehHEML Jat
x€
% —",
18
SECTION III
Traditional Sewing
How to select traditional sewing mode.
1. Menu screen is shown on computer display
screen.
"See caution note on page 11.
|
2. Press the key. Screen A will appear.
3. Press the ES key. Screen B will appear.
4. Press the [>] key. Screen C will appear.
5. Press the (bh key. Screen B will appear.
6. Press the (bq key. Screen A will appear.
Press the key or the key to return
to the menu screen.
How to Select a Stitch
Press the stitch key. The key will darken to indicate
the stitch has been selected. The screen will also
show:
@ Where to set the thread tension dial. a a.
@ An appropriate foot. A
@® Stitch Width and Length Key:
Width and length are automatically set after
selecting the stitch. Press the key; the
screen will change and the settings may be
adjusted. Press the key to return to
screen A.
@ Needle Stop Position Key:
This key is very similar to the up/down needle
key. The difference is that the needle stop
position key only activates the up or down
positioning after sewing. The up/down needle
key immediately drops or lifts the needle.
Needle will stop down
Needle will stop up