Zipper Inssthon Sain Ceeded Adaeewcee Evant Eeek Hebddetead Chat Atsseegene; Fabric Preparation; Lapped Application - ELNA EnVision 8006 Instruction Manual

@)
o xe
1
{
|
21
Zipper Insertion
@ 1: Straight stitch
@ E: Zipper foot
Attach the pin on the zipper foot to the groove on the
shank.
e To sew the left side of the zipper, attach the
zipper foot on the right-hand side.
¢ To sew the right side of the zipper, attach the
zipper foot on the left-hand side.
@® Groove
@ Pin
® Sew lett side
© Sew right side
Fabric Preparation
Add 1 cm (3/8") to the zipper size. Use this
measurement and mark the opening for the zipper.
Place right sides of fabric together and sew the seam
located below zipper placement. (Make sure to
reverse sew the stitches directly below the zipper
placement.)
Increase stitch length to 4.5 and baste the zipper
opening closed. Press the seam and basting seam
open.
Lapped Application
Open zipper and place it face down on the seam
allowance. Teeth are on the seam line and zipper top
is 1 cm (3/8") from fabric top edge. Attach foot with
left side pin. Baste zipper in place, sewing from
bottom to top.
Close zipper. Turn zipper face up (right seam
allowance forms a small fold at basting line) and
smooth zipper teeth away from seam. Attach foot with
right side pin. Reset straight stitch length to 2.2.
Starting at the bottom, sew through the folded seam
allowance and zipper tape.