Corded: Buttonhole Vce. Csvacten Dati Cried Saedaceoievn - ELNA EnVision 8006 Instruction Manual

35
Corded Buttonhole
Sew a corded buttonhole using the same procedure
described on pages 31-33 for a classic buttonhole
style.
* Set the stitch width to match the thickness of the
cording.
With the buttonhole foot raised, hook the filler cord on
the spur at the back of the buttonhole foot. Bring the
ends forward under the buttonhole foot.
Position the cord into the forks on the front of the foot
to hold them tight.
@ _ R: Automatic buttonhole foot
@) Spur
Lower the needle into the garment where the
buttonhole will start and lower the presser foot.
Press the foot control and slowly sew the buttonhole.
Each side of the buttonhole and the bartacks will be
sewn over the cord. Remove the fabric from the
machine and cut only the sewing threads.
Pull the left end of the cord to tighten it. Thread the
end through a darning needle, draw to the wrong side
of the fabric and cut.
Cut open buttonhole.
Press the Es key to move from Screen B to
Screen C.