Thread Breaks While Embroidering; Beginning Key; Frame Backward Key; Frame Forward Key Uc - ELNA EnVision 8006 Instruction Manual

48
Thread Breaks While Embroidering
Press the star/STOP key to stop the machine after
thread breaks or upon discovering a mistake in
design placement. Raise presser foot.
Press the @) key.
There are now three options available for
repositioning the hoop.
Beginning Key:
If you have started the machine and in the middle of
sewing a word (or some other pattern) you want to
reposition the hoop/fabric and sew again from the
beginning of the word (pattern), press the key.
Frame Backward Key: (<<)
This key is used to reposition the hoop after the
thread breaks. By pressing this key, you can move
the hoop backward to the point where the thread
broke.
¢ The hoop is moved backward 10 stitches each
time the key is pressed.
Frame Forward Key: [PP]
Pressing this key moves the hoop forward without
sewing. The key is used for correction when the hoop
is moved backwards too far.
¢ The hoop is moved forward 10 stitches each time
the key is pressed.
NOTE: Before pressing (<<) >>) keys,
make sure the needle is at its highest position.
Rethread the machine.
Press the (<<) key. You will probably need to press
the key more than once to align the needle position
to sew before the thread break.
Lower presser foot. Press START/stop key.