ELNA EnVision 8006 Instruction Manual page 25

22
Zipper Sewing, coni'd.
Stop just before the zipper foot reaches the slider on
the zipper tape. Lower the needle slightly into the
fabric. Raise the zipper foot and open the zipper.
Lower the foot and stitch the remainder of the seam.
Close the zipper and spread the fabric flat with the
right side facing up. Baste through the opened seam
allowance and zipper tape.
Move the zipper foot to the left side pin. Guide the
edge of foot along the zipper teeth and stitch through
the garment and zipper tape. Stop about 5 cm (2")
from the top of the zipper.
Slightly lower the needle into the fabric. Raise the
foot, remove the basting stitches and open the zipper.
Lower the foot and stitch the remainder of the seam,
making sure the fold is even.