How To Skip On 100 Series Envision Cards - ELNA EnVision 8006 Instruction Manual

51
How to Skip on 100 Series
EnVision Cards
(You may sew a design section out of sequence.)
Example: Card 104
@) Select design 1.
@ You would like to sew only section 5. Press the
key indicating section 4. The outline around
sections 1, 2, 3 and 4 will disappear. The
machine has skipped to section 5.
@ Thread machine and sew design section 5.
Re-hoop fabric or use sewing and frame position key
to reposition hoop.
Sew the section again by pressing the
START/stop key.
NOTE: Press the [**/ key to cancel the "skip"
mode.
Press the («| key to cancel "skip" mode
and to show other design options.