Toro 03956 Operator's Manual page 71

Cleaning the Installing the
Fuel-Pickup Tube
1. Clean the screen at the end of the fuel pick-up
tube (Figure 127).
Figure 127
2. Carefully assemble the fuel pick-up tube and
float into the fuel tank
Figure 128
1. Cap (fuel sender)
3. Align the fittings for the pick-up tube and return
tube inboard.
4. Tighten the fuel-sender cap to the fuel tank.
5. Assemble the hose onto the fittings of the fuel
sender, and secure the hoses to the fittings with
the clamps (Figure
(Figure 128).
129).
1. Hoses
2. Clamp
6. Plug the connector of the fuel-sender harness
into the connector of the machine wire harness
(Figure 130).
g373881
1. 2-pin connector (machine
wire harness)
7. Align the holes in the fuel-sender cover with the
holes in the fuel tank, and secure the cover to
the tank with the 5 Phillips-head screws
131).
g373886
71
Figure 129
3. Fitting (fuel sender)
Figure 130
2. 2-socket connector (fuel
sender)
g373882
g373884
(Figure