Toro 03956 Operator's Manual page 45

Parked or Recovery Regeneration
•
When the engine computer requests either a
parked regeneration or a recovery regeneration,
the regeneration request icon
in the InfoCenter.
Figure 70
•
The machine does not automatically perform a
parked regeneration or a recovery regeneration,
you must run the regeneration through the
InfoCenter.
Parked Regeneration Messages
When a parked regeneration is requested by the
engine computer the following messages display in
the InfoCenter:
•
Engine warning SPN 3720, FMI 16
Figure 71
•
Parked regeneration required A
(Figure 72)
Note:
Advisory #188 displays every 15 minutes.
Figure 72
•
If you do not perform a parked regeneration
within 2 hours, the InfoCenter displays parked
(Figure 70) displays
g224404
(Figure 71)
g213863
#188
DVISORY
g224397
45
regeneration required—power takeoff disabled
A #189 (Figure
DVISORY
Figure 73
Important:
Perform a parked regeneration to
restore the PTO function; refer to
Perform a Parked or Recovery Regeneration
(page 46) and Performing a Parked or Recovery
Regeneration (page
Note:
The Home screen displays the PTO
disabled Icon (Figure
Figure 74
Recovery Regeneration Messages
When a recovery regeneration is requested by the
engine computer, the following messages display in
the InfoCenter:
•
Engine warning SPN 3719, FMI 0
Figure 75
•
Recovery regeneration required—power takeoff
disabled A
DVISORY
Figure 76
73).
Preparing to
46).
74).
(Figure
#190 (Figure 76)
g224398
g224415
75)
g213867
g224399