Toro 03956 Operator's Manual page 48

5. The InfoCenter displays the I
R message
EGEN
6. The InfoCenter displays the time to complete
message (Figure
7. The engine computer checks the engine state
and fault information. The InfoCenter may
display the following messages found in the
table that follows:
Check Message and Corrective Action Table
Corrective Action: Exit the regeneration menu and run the
machine until the time since last regeneration is greater than
50 hours; refer to Time Since Last Regeneration (page
Corrective Action: Troubleshoot the engine fault and retry
DPF regeneration.
NITIATING
(Figure 83).
Figure 83
84).
Figure 84
DPF
Check Message and Corrective Action Table
(cont'd.)
g224411
Corrective Action: Start and run the engine.
g227681
Corrective Action: Run the engine to warm the coolant
temperature to 60°C (140°F).
Corrective Action: Change the engine speed to low idle.
g224406
Corrective Action: Troubleshoot the engine computer
g224416
condition and retry DPF regeneration.
8. The InfoCenter displays the home screen and
the regeneration acknowledge icon
appears in the lower right corner of the screen
as the regeneration processes.
41).
Note:
runs, the InfoCenter displays the high
exhaust-temperature icon
9. When the engine computer completes a
parked or recovery regeneration, the InfoCenter
48
Figure 85
While the DPF regeneration
(Figure 85)
g224403
.