Table of Contents
Advertisement
Figure 33
1. Rubber grommet
3.
Ensure that the seal is assembled to the hood
lock
(Figure
34).
Figure 34
1. Hood latch
2. Nut
4.
Remove the nut from the lock.
5.
Outside the hood, insert the hook end of the
latch through the hole in the hood.
Note:
The seal is aligned to the outside of the
hood.
6.
Inside the hood, Secure the lock to the hood
with the washer and nut.
g004143
g375326
3. Seal
4. Washer
7.
Close the hood, and use the enclosed hood-latch
key to check that the hook of the lock engages
the frame catch when locked.
20
Advertisement
Table of Contents
