Toro 03956 Operator's Manual page 70

Figure 124
1. 2-pin connector (machine
wire harness)
4. Move the clamps that secure the hoses to the
fittings of the fuel sender inboard, and remove
the hoses from the fittings
Figure 125
1. Hoses
2. Clamp
5. Loosen the fuel-sender cap
g373884
2. 2-socket connector (fuel
sender)
(Figure 125).
g373882
3. Fitting (fuel sender)
(Figure 126).
1. Cap (fuel sender)
6. Carefully lift the fuel sender from the tank.
Note:
Do not bend the pick-up tube, return
tube, or float arm.
70
Figure 126
g373883