Daikin Altherma 3 R MT F Series Installer's Reference Manual page 18

3 | Specific installer safety instructions
Installer reference guide
18
Mounting the outdoor unit (see
WARNING
Fixing method of the outdoor unit MUST be in accordance with the instructions from
this manual. See
CAUTION
To avoid injury, do NOT touch the air inlet or aluminium fins of the unit.
WARNING
Rotating fan. Before powering ON or servicing the outdoor unit, make sure that the
discharge grille covers the fan as protection against a rotating fan. See:
▪
"7.3.6 To install the discharge
▪
"7.3.7 To remove the discharge grille, and put the grille in safety
Mounting the indoor unit (see
WARNING
Fixing method of the indoor unit MUST be in accordance with the instructions from
this manual. See
Piping installation (see
DANGER: RISK OF BURNING/SCALDING
WARNING
The field piping method MUST be in accordance with the instructions from this
manual. See "8 Piping
NOTICE
▪
Do NOT use mineral oil on flared part.
▪
Do NOT reuse piping from previous installations.
▪
NEVER install a drier to this R32 unit to guarantee its lifetime. The drying material
may dissolve and damage the system.
CAUTION
▪
Incomplete flaring may cause refrigerant gas leakage.
▪
Do NOT re-use flares. Use new flares to prevent refrigerant gas leakage.
▪
Use flare nuts that are included with the unit. Using different flare nuts may
cause refrigerant gas leakage.
WARNING
Provide adequate measures to prevent that the unit can be used as a shelter by small
animals. Small animals that make contact with electrical parts can cause
malfunctions, smoke or fire.
"7.3 Mounting the outdoor
"7.3 Mounting the outdoor
4
grille" [ 75]
"7.4 Mounting the indoor
"7.4 Mounting the indoor unit" [
"8 Piping installation" [ 4
4
installation" [ 82].
unit" [ 4 71])
4
unit" [ 71].
position" [
4
unit" [ 79])
4 79].
82])
ERRA08~12E + ELVZ12S18+23E
Daikin Altherma 3 R MT F
4P708478-1 – 2023.05
4
77]