Table of Contents
Advertisement
Advanced Color Submenu
This menu adjusts the color coordinates of the current zone. These controls are used by
advanced installers to achieve exact color point targets on the display. In some cases, the target
color coordinates may not be achievable. In this case, an asterisk (*) will appear next to the
color coordinate value.
Note: The white color point should be adjusted before adjusting the other color points.
Current Zone
•
The zone that is currently being adjusted. All of the settings in this menu are saved per
zone, and all color coordinate values are also saved per Color Gamut setting. The zone's
corresponding input source is shown in the title bar, and the graphic beneath that shows
which zone is being adjusted in the current Multi-Source View mode and Advanced Layout
setting (if applicable).
Planar UltraRes L Series User Manual
020-1427-00A
97
Page | 97
Advertisement
Table of Contents
