9. Repeat steps 7 and 8 for columns 3 and 4.
1
2
10. If installing into an inset, see "Last Column Installation in Recess" on page 66 before
continuing. Column 5 requires all edge guards be removed before hanging on the mount
bars. Make sure that both top and bottom far right hanger brackets are hooked on the
mount bars, and slide column 5 in contact with column 4.
Caution:
Do not slide the column to the right or the column may fall off the mount bars,
causing injury and/or product damage.
1
2
Planar UltraRes L Series User Manual
020-1427-00A
39
3
4
3
4
5
Page | 39