Table of Contents
Advertisement
2.1
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the display near water.
6. For cleaning the LED modules, refer to Planar Display Cleaning Guidelines found at
https://www.planar.com/support/display-cleaning/
7. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles and the point where they exit from any equipment.
10. Only use the attachments/accessories specified by the manufacturer.
11. Unplug all displays during lightning storms or when unused for long periods of time.
12. In instances where a power surge has occurred and a display no longer has an image, the display
power will need to be reset.
13. You must follow all National Electrical Code regulations. In addition, be aware of local codes and
ordinances when installing your system.
14. Refer all servicing to qualified service personnel. Servicing is required when any of the displays
have been damaged in any way. For example, if the AC power cord or plug is damaged, liquid has
been spilled or objects have fallen into a display, the displays have been exposed to rain or
moisture, do not operate normally or have been dropped.
15. Keep the packing material in case the equipment should ever need to be shipped.
16. Mounts must be secure. The structure must be strong enough to hold displays brackets, cables
and accessories. Seismic engineers should be consulted in areas prone to earthquakes.
17. Caution: There is a risk of explosion if the battery is replaced with incorrect type. Dispose of used
batteries according to local regulations.
18. The LEDs mounted on the front surface of the Planar UltraRes L Series can be damaged by
contact with fingernails, rings and other hard items.
19. Any changes or modifications to the display not expressly approved by Planar could void the
user's authority to operate this equipment.
Planar UltraRes L Series User Manual
020-1427-00A
7
Page | 7
Advertisement
Table of Contents
