Planar UltraRes L Series User Manual page 36

3. Slide the column all the way to the left until the hanger brackets are against the mount bar
end plates.
4. Remove the flathead screws securing a column edge guard. Carefully remove the guard
without contacting the LEDs. Repeat for the 3 other edge guards.
Note: The outer edges of the columns have magnets that may hold the guards in place.
These may require more force to remove.
Planar UltraRes L Series User Manual
020-1427-00A
36
Hanger Bracket
Edge Guard
End Plate
Page | 36