Planar UltraRes L Series User Manual page 93

Set Date and Time
•
Set the internal system clock. If Use Network Time is unchecked, you can set the following
settings individually: Time Zone, Year, Month, Day, Date, Hour, and Minute.
•
Note: If Use Network Time is checked and DHCP is unchecked, the display will be unable
to obtain the network time unless a DNS server is programmed. This is done via the DNS
Server setting in the Network menu or the serial command interface.
Set Event 1~Event 20
•
Event Enabled: Turns on the event. If disabled, the settings are saved so that the event
can be re-enabled.
•
Frequency: The frequency of the event. Options are Daily, Weekly, Weekdays,
Weekends.
•
Action: The action to take for the event. Options are Turn On, Turn Off, Recall, Panel
Brightness.
•
Note: The Turn On action will not work if the Power Down Mode setting is set to
Standby Mode. To allow the Turn On action to occur, set Power Down Mode to
Networked Standby Mode or Fast Startup.
•
Data: The preset to recall when the Action is set to Recall, or the intensity setting when
the Action is set to Panel Brightness.
Planar UltraRes L Series User Manual
020-1427-00A
93
Page | 93