Sony MVS-8000 User Manual page 1164

5
To set the shift operation of the source selection buttons
To set the operation mode of the rightmost button in the source selection button
row with different destinations assigned to the 1st and 2nd rows, select the
source table in the Source Table Assign menu, then in the <Xpt Shift Mode>
group select one of the following.
Hold: Acts as a shift button, and the shifted source selection buttons are
Lock: Acts as a shift button, and pressing the button toggles between the
Off: Acts as a cross-point button, that is, button number 16 on a 16-button
To expand the shift function
To set the [KEY] button as a shift operation expansion button, in the Source
Table Assign menu select the source table, then in the <Expand Xpt Shift
Assign> group, press [Key Button].
In order not to expand the shift operation, press [No Assign] in the <Expand
Xpt Shift Assign> group.
Assigning levels to a level selection button
To assign levels to the [LEVEL1] to [LEVEL4] buttons in the auxiliary bus
control block, use the following procedure.
1
2
3
1164
Auxiliary Bus Control Block Settings (Aux Assign Menu)
Knob Parameter Adjustment
1 Source No Source selection button selection
2 No Source selection in S-Bus space
For a button whose operation you want to disable, press [Inhibit].
Press [Source Set] to confirm the selection.
enabled while the button is held down.
shifted and unshifted states of the source selection buttons.
system, button number 24 on a 24-button system, and button number 32 on
a 32-button system.
In the Panel >Aux Assign >RTR Mode Setting menu, press [Level Button
Assign].
The Level Button Assign menu appears. The status area shows a list of the
assignment status of levels to each button.
In the <Level Button Select> group, select the button you want to set.
In the <Level Assign> group, press the levels you want to assign to the
button, turning them on.
You can select plural of levels. You can also make a selection that overlaps
that of another button.
Setting values
1 to 128
1 to 1024