Sony MVS-8000 User Manual page 1154

Hide thumbs Also See for MVS-8000:

Table of Contents

Setting the cross-point button shift operation

You can set the operation of the rightmost button in each row of cross-point

buttons excluding the reentry buttons.

In the <Xpt Shift Mode> group of the Panel >Xpt Assign >Main, V/K Pair

Assign menu or Panel >Xpt Assign >Table Button Assign menu, select one of

the following for each cross-point table.

Hold: Acts as a shift button, and the shifted version of the cross-point buttons

Lock: Acts as a shift button, and pressing the button toggles between the

Off: Acts as a cross-point button, in a 16-button system as button number 16,

Setting the action of the [SHIFT] button in the cross-point control

In the <Display Shift Mode> group of the Panel >Xpt Assign >Main, V/K Pair

Assign menu or Panel >Xpt Assign >Table Button Assign menu, select either

of the following.

Display: Functions as a shift button dedicated to the source name displays.

Shift All Bus: Functions as a shift button for all buses.

• It is not possible to make this setting separately for each of the M/E and

• "Shift All Bus" is only valid when the cross-point button shift operation (see

Setting the source signal name

Cross-Point Settings (Xpt Assign Menu)

is enabled while the button is held down.

shifted version and the unshifted version.

in a 24-button system as button number 24, and in a 32-button system as

button number 32.

PGM/PST banks.

previous item) is set to "Lock" or "Off."

In the Panel >Xpt Assign menu or Panel >Xpt Assign >Table Button

Assign menu, press [Src Name/LCD Color].

The Src Name/LCD Color menu appears.

Turn the knob to select the signal to be set.

Press [Source Name].

Source signal selection

Number of source signals to be

Setting values