Adjusting The Reference Phase; Specifying The Video Switching Timing; Setting The Operation Mode - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

• DME Config: Set the DME channel assignments used on the individual

M/E and PGM/PST banks.

• Side Flags: Make settings relating to the side flag function (inserting a

selected image on both sides of a 4:3 image).

Adjusting the Reference Phase

To adjust the switcher internal reference phase, in the Switcher >Config menu,

set the following parameter.

In the Switcher >Config menu, press [Switching Timing].

The Switching Timing menu appears.

Select any of the following.

Any: Not specified

Field 1: Field 1 (odd fields)

Field 2: Field 2 (even fields)

When the signal format is set to 720P or 1080PsF, this selection is not possible.

In the <M/E Config> group of the Switcher >Config menu, select the operation

mode for each M/E or PGM/PST bank from the following.

• Standard mode

• Multi Program mode

• DSK mode (PGM/PST only)

For details of the modes, see the explanation of the M/E Config function (page

Switcher internal reference phase

Setting values

–32.00 to +96.00

Settings for Switcher Configuration (Config Menu)