Assigning A Function To The Key 2 Row Cross-Point Buttons - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

Assigning a Function to the Key 2 Row Cross-Point

You can assign a function to the key 2 row cross-point buttons of each of the

M/E-1 to M/E-3, or PGM/PST banks, and use them in the same way as the

buttons in the utility/shotbox control block.

In the Prefs/Utility menu, press [Key2/4 Bus Button Assign].

The Key2/4 Bus Button Assign menu appears. The cross-point settings for

the key 2 row appear.

Refer to "Assigning a Function to a Memory Recall Button in the Utility/

Shotbox Control Block" (page 1171) to make the assignment. Note,

however, the following differences.

• The bank setting of knob 1 is from 1 to 5.

• The adjustment range of knob 2 is from 1 to the number of cross-point

• The character string for a button name is a maximum of four characters.

For details of executing a utility/shotbox function with the key 2 row, see

"Executing Utilities With the Cross-Point Buttons in the Key 2 Row"

(Volume 2) and "Executing a Shotbox Function With the Key 2 Row Cross-

Point Buttons" (Volume 2).

Setting Button Assignments (Prefs/Utility Menu)