Selecting Cross-Point Assign Tables - Sony MVS-8000 User Manual

2
3
4

Selecting Cross-Point Assign Tables

You can select the cross-point assign table to be used for each of the following
banks or buses.
• M/E-1 to M/E-3 banks and PGM/PST bank
• Buses assignable to AUX delegation buttons
Notes
It is not possible to assign cross-point tables 5 to 14 to a bus of a switcher
operated by an MKS-8080/8082 AUX Bus Remote Panel.
1
1156
Cross-Point Settings (Xpt Assign Menu)
Using any of the following methods, select the number of the table to use
as the copy source and the number of the table you want to be the copy
destination.
• Press directly on the list of copy sources (left-side list) or the list of copy
destinations (right-side list) in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Left No Selection of copy source
2 Right No Selection of copy destination
Press [Copy].
A confirmation message appears, asking whether or not to execute the
copy.
To execute the copy, press [Yes], and to cancel the operation, press [No].
In the Panel >Xpt Assign menu, using any of the following methods, select
the switcher bank or bus.
• Press directly on the list on the left of the status area.
• Press the arrow keys on the list on the left to scroll the reverse video
cursor.
• Turn the knobs.
Knob Parameter
1 Bank/Bus No
2 Num
Setting values
1 to 15
1 to 14
Adjustment Setting values
Switcher bank or 1 and upwards
bus selection
Number of 1 and upwards
selected switcher
banks or buses