Digital Display Circuit Board And Connections - Kohler KG40 Operation

1.2.5

Digital Display Circuit Board and Connections

The digital display circuit board provides:

The backlit LCD (liquid crystal display) for monitoring the generator set functions and output values

Master control switches with status lights

Fault lamp

Pushbutton/rotary selector dial to navigate the generator set displays

Alarm horn and alarm silence/lamp test switch/light

Mini USB connector for PC setup using SiteTech™ software
See Figure 4 Digital Display Circuit Board Connectors
Figure 4 for the circuit board connections.
Circuit Board Connections
P9 Connector the 24-pin connector attaches directly to the main logic circuit board.
P10 Connector mini USB for PC upgrades located on the front panel using SiteTech™ software.
P11 Connector is a 20-pin connector (not used).
P11 20-pin connector (not used)
Figure 4 Digital Display Circuit Board Connectors
30
P9 24-pin connector (opposite
side) connects to main board
P10 5-pin mini USB connector
TP-6694
GM65741-
6/22