Table of Contents
Advertisement
Maintenance
4. Install a new wiper blade assembly in
the reverse order of removal.
2C_FontWiperReplacementProcedure_6
5. With the Engine Start/Stop button in
the ON position, turn the wiper switch to
any ON position to return the wipers to
the bottom resting position.
NOTICE
• Avoid the wipers from touching the
windshield when the wiper blade is
disassembled to prevent windshield
damage.
• The wiper may not operate for about 10
seconds if the wiper is operated
without washer fluid or the blades are
frozen to prevent damage to the motor.
9-30
Rear window wiper blade
replacement
2C_RearWiperReplacementProcedure_1
1. Raise the wiper arm and then rotate the
wiper blade assembly (1).
2. Pull out the wiper blade assembly (2).
3. Install the new blade assembly by
inserting the center part into the slot in
the wiper arm until it clicks into place
(3).
2C_RearWiperReplacementProcedure_2
4. If the replacement is complete, put
down the wiper arm onto the rear
windshield, and turn the vehicle ON
and operate the wipers to check the
blade is installed correctly.
Advertisement
Chapters
Table of Contents
