Hyundai KONA 2024 Owner's Manual page 358

Information
• If you change the Warning Methods,
the Warning Methods of other Driver
Assistance systems may change.
• The Warning Volume and Haptic
Warning cannot be turned off at the
same time. When one of the warning is
turned off the other is activated.
• If the engine is restarted, Warning
Methods will maintain the last setting.
Blind-Spot
Collision-Avoidance Assist
operation
Collision warning
2C_BCAVehicleDetection
To warn the driver a vehicle is detected,
the warning light on the side view mirror
illuminates.
Vehicle detection operates under
following conditions.
• Your vehicle speed: above 12 mph (20
km/h)
• Vehicle in the blind spot area: above 6
mph (10 km/h)
Collision warning operates when the turn
signal is turned on in the direction of the
detected vehicle.
• To warn the driver of a collision, the
warning light on the side view mirror
blinks. At the same time, an audible
warning sounds and the steering wheel
vibrates.
• When the turn signal is turned off, the
collision warning is canceled and
Blind-Spot Collision-Avoidance Assist
returns to vehicle detection state.
Collision warning operates under
following conditions.
• Your vehicle speed: above 25 mph (40
km/h)
• Vehicle in the blind spot area: above 6
mph (10 km/h)
WARNING
• The detecting range of the rear corner
radar is determined by a standard road
width, therefore, on a narrow road,
Blind-Spot Collision-Avoidance Assist
may detect other vehicles two lanes
over and warn you. In contrast, on a
wide road, Blind-Spot
Collision-Avoidance Assist may not be
able to detect a vehicle driving in the
next lane and may not warn you.
• When the hazard warning flasher is on,
the collision warning by the turn signal
will not operate.
7
7-41