Hyundai KONA 2024 Owner's Manual page 425

Driver Assistance System
Rear View while driving
The driver is able to check the rear view
on the screen while driving, it is to assist
with backing up.
Operating conditions
• The rear view is selected by pressing
the change view button (2) after
pressing the Parking/View button (1),
while the gear is in N (Neutral) or D
(Drive), and vehicle speed is above 6
mph (10 km/h).
You may select rear view or 3D view using
the change view button (2).
Off conditions
• The gear is shifted to P (Park).
• The Parking/View button (1) or the
Infotainment system button (3) is
Pressed.
Information
• When the rear view while driving is
activated, the latest used view mode is
displayed.
• The Rear View Parking Lines does not
operate on the rear view while driving.
• The rear view while driving does not
turn off even when the vehicle speed is
lower than 6 mph (10 km/h) once it is
on.
• When the rear view while driving is on,
the rear top view and rear side view are
deactivated in all speed.
7-108
3D view
The 3D view shows the image around the
vehicle from various angles.
You can change angles by tapping the
screen. Press the 3D view button again to
return to the initial angle.
Operating conditions
When the 3D view is selected by pressing
the change view button (2):
• The gear is in P (Park), N (Neutral) or D
(Drive) when vehicle speed is below 6
mph (10 km/h).
• The Surround View Monitor is turned on
when the gear is in R (Reverse).
Off conditions
When the gear is in P (Park), N (Neutral) or
D (Drive):
• The gear is shifted to P (Park) from N
(Neutral) or D (Drive).
• The Parking/View button (1) or the
Infotainment system button (3) is
Pressed.
• Vehicle speed is above 6 mph (10
km/h).
When the gear is in R (Reverse):
• The gear is shifted to P (Park)
Information
3D view does not display guidelines.