Hyundai KONA 2024 Owner's Manual page 171

Convenience Features
Automatic reversal
if equipped
2C_WindowEmergencyStop
If a window senses any obstacle while it is
closing automatically, it stops and lowers
about 12 inches (30 cm) to allow the
object to be cleared.
If the window detects any resistance
while the power window switch is pulled
up continuously, the window stops
upward movement and then lowers about
1 inch (2.5 cm).
If the power window switch is pulled up
continuously again within 5 seconds after
the window is lowered by the automatic
window reverse feature, the automatic
window reverse does not operate.
Information
The automatic reverse feature is active
only when the "Auto Up" feature is used
by fully pulling up the switch to the
second detent.
NOTICE
Do not install any accessories on the
windows. The automatic reverse feature
may not operate.
5-46
WARNING
Make sure body parts or other objects are
safely out of the way before closing the
windows to avoid injuries or vehicle
damage.
Objects less than 0.16 inches (4 mm) in
diameter caught between the window
glass and the upper window channel may
not be detected by the automatic reverse
window and the window does not stop
and reverse direction.
Power window lock button
2C_WindowLockButton
The driver can disable the power window
switches on the rear passenger doors by
pressing the power window lock button.
When the power window lock button is
pressed:
• The driver's master control can operate
all the power windows.
• The front passenger's control cannot
operate the front passenger's power
window.
• The rear passenger's control cannot
operate the rear passengers' power
window.