Hyundai KONA 2024 Owner's Manual page 390

WARNING
• When the turn signal indicator is turned
on to the left while there is a vehicle
ahead, the vehicle may accelerate
temporarily. Pay attention to the road
conditions at all times.
• Regardless of the driving direction in
your country, Overtaking Acceleration
Assist will operate when the conditions
are satisfied. When using the function
in countries with different driving
direction, always check the road
conditions at all times.
Turning on Smart Cruise Control
2C_SpeedControlButton
• Press the Driving Assist button to turn
on Smart Cruise Control. The speed will
be set to the current speed on the
instrument cluster.
- A long press turns on MSLA, not
Smart Cruise Control. Use a short
press to turn on Smart Cruise Control.
• If there is no vehicle in front of you, the
set speed will be maintained, but if
there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead. If the
vehicle ahead accelerates, your vehicle
will travel at a steady cruising speed
after accelerating to the set speed.
Information
If your vehicle speed is between 0-20
mph (0-30 km/h) when you press the
Driving Assist button, Smart Cruise
Control speed will be set to 20 mph (30
km/h).
Setting vehicle distance
2C_SCCDistanceButton
Press the button repeatedly to cycle
through the headway settings from
Distance 4 → Distance 3 → Distance 2 →
Distance 1 → Distance 4.
If you drive at 56 mph (90 km/h), the
distance is maintained as follows:
• Distance 4: about 172 ft. (52.5 m)
• Distance 3: about 130 ft. (40 m)
• Distance 2: about 106 ft. (32.5 m)
• Distance 1: about 82 ft. (25 m)
Information
The distance is set to the last set distance
when the vehicle is restarted, or when
Smart Cruise Control was temporarily
canceled.
7
7-73