Hyundai KONA 2024 Owner's Manual page 374

Warning overspeed
2C_ISLAOverSpeedWarningInfo
When driving at a speed higher than the
displayed speed limit, the speed limit is
displayed in red.
Changing set speed
2C_ISLAChangeSetSpeedInfo
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the set
speed needs to be changed. At this time,
the driver can change the set speed
according to the speed limit by using the
+ or - switch on the steering wheel.
Set Speed Auto Change (Navigation
equipped)
2C_ISLASetSpeedAutoChangeInfo
Manual Speed Limit Assist or Smart
Cruise Control assists the vehicle to
adjust its speed according to the speed
limit. When the cruising speed is set as
same as the speed limit, the vehicle
automatically adjusts its speed if the
speed limit changes. The function
operates on the road which has a speed
limit of 45 mph (70 km/h) or higher. When
the function is active, the cruising speed
on the instrument cluster appears in
green.
WARNING
• If you want to drive below the speed
limit, adjust the Speed Limit Offset
below '0' or use the - switch on the
steering wheel to lower the set speed.
• Even after changing the set speed
according to the speed limit of the road,
the vehicle can still be driven over the
speed limit. If necessary, depress the
brake pedal to reduce your driving
speed.
• If the speed limit of the road is under 20
mph (30 km/h), the set speed change
function will not work.
• Intelligent Speed Limit Assist operates
using the speed units in the instrument
cluster set by the driver. If the speed
unit is not set to the speed unit used in
your area, Intelligent Speed Limit Assist
may not operate properly.
7
7-57