Hyundai KONA 2024 Owner's Manual page 282

ESC operation
ESC ON condition
When the Engine Start/Stop button is in
the ON position, the ESC and the ESC OFF
indicator lights illuminate for about 3
seconds. After both lights go off, ESC is
enabled.
When operating
WL_ESCOperatingLamp
When the ESC is operating, the ESC
indicator light blinks:
• When you apply your brakes under
conditions that may lock the wheels,
you may hear sounds from the brakes,
or feel a corresponding sensation in the
brake pedal.
• If Cruise Control has been used when
ESC activates, Cruise Control
automatically disengages. Refer to the
"Cruise Control (CC)" section in
Chapter 7.
• When moving out of the mud or driving
on a slippery road, the engine RPM
(revolutions per minute) may not
increase even if you depress the
accelerator pedal all the way. This is to
maintain the stability and traction of
the vehicle and does not indicate a
problem.
ESC OFF condition
WL_ESCWarningLamp
To cancel ESC operation:
• State 1
Press the ESC OFF button briefly. The ESC
OFF indicator light and the message,
"Traction control disabled" illuminate.
The traction control function of ESC
(engine management) is disabled, but the
brake control function of ESC (braking
management) still operates.
• State 2
Press and hold the ESC OFF button
continuously for more than 3 seconds.
The ESC OFF indicator light and/or
message "Traction and Stability Control
disabled" illuminates and a warning
chime sounds. Both the traction control
function of ESC (engine management)
and the brake control function of ESC
(braking management) are disabled.
If the Engine Start/Stop button is pressed
to the OFF position when ESC is off, ESC
remains off. Upon restarting the vehicle,
ESC automatically turns on again.
6
6-39