Hyundai KONA 2024 Owner's Manual page 490

CAUTION
Securely install the sealant filling hose
to the valve. If not, sealant may flow
backward, possibly clogging the filling
hose.
5. Make sure the compressor is turned off
and plug the compressor power cord
(4) into the vehicle power outlet.
2C_TMKPrecedure_4
WARNING
Do not connect another vehicle's Tire
Mobility Kit to the power outlet. This
may cause a fire due to the difference in
current capacity.
6. With the engine ON, switch on the
compressor and let it run for about 5-7
minutes to fill the sealant up to proper
pressure. (refer to the "Tires And
Wheels" section in chapter 2). The
inflation pressure of the tire after filling
is unimportant and can be
checked/corrected later.
Be careful not to overinflate the tire and
stay away from the tire when filling it.
CAUTION
Do not attempt to drive your vehicle if
the tire pressure is below 29 psi (200
kPa). This could result in an accident
due to sudden tire failure.
7. Switch off the compressor.
8.Detach the hoses from the sealant
bottle connector and from the tire
valve.
Return the Tire Mobility Kit to its
storage location in the vehicle.
8
8-23