Hyundai KONA 2024 Owner's Manual page 386

Decreasing set speed
• Push the - switch down and release it
immediately. The set speed will
decrease by 1 mph (1 km/h) each time
the switch is operated in this manner.
• Push the - switch down and hold it
while monitoring the set speed on the
instrument cluster. The set speed will
decrease to the nearest multiple of five
(multiple of ten in km/h) at first, and
then decrease by 5 mph (10 km/h) each
time the switch is operated in this
manner.
Release the switch at the speed you
want to maintain.
Accelerating temporarily
If you want to speed up temporarily when
Cruise Control is on, depress the
accelerator pedal.
To return to the set speed, take your foot
off the accelerator pedal.
If you push the + switch up or - switch
down at increased speed, the set speed
will be set to the current increased speed.
Temporarily pausing Cruise Control
2C_CCTemporarilyPausing
Cruise Control will be paused when:
• Depressing the brake pedal.
• Pressing the switch.
• Shifting the gear to N (Neutral).
• Decreasing vehicle speed to less than
about 20mph (30 km/h).
• ESC (Electronic Stability Control) is
operating.
• Downshifting to 2nd gear when in
Manual Shift mode.
The set speed will turn off but the Cruise
( ) indicator will stay on.
NOTICE
If Cruise Control pauses during a situation
that is not mentioned, have the vehicle
inspected by an authorized HYUNDAI
dealer.
Resuming Cruise Control
2C_SpeedControlResuming
Operate the +, - or
If you push the + switch up [A] or - switch
down [B], vehicle speed will be set to the
current speed on the instrument cluster.
If you press the switch [C], vehicle
speed will resume to the preset speed.
The vehicle speed must be above 20 mph
(30 km/h) for Cruise Control to resume.
WARNING
Check the driving condition before using
the switch. Driving speed may sharply
increase or decrease when you press the
switch.
7
switch.
7-69