Installing And Connecting The Power Switch - JUKI LK-1901AN Instruction Manual

4 . Installing and connecting the power switch
1
(2) Connecting the power source cord
Voltage specifications at the time of delivery from the factry are indicated on the voltage indication seal.
Connect the cord in accordance with the specifications.
Rating label
• Connecting single phase 200V, 220V, 230V and 240V
Light blue
Table
Control box
Green/Yellow
Brown
• Connecting three phase 200V, 220V and 240V
White
Table
Control box
Green/Yellow
Black
Red
Black
3
2
Voltage caution seal
Voltage indication seal (3-phase type only)
Light blue
Green/Yellow
Plug
Brown
Power switch
White
Green/Yellow
Plug
Red
Power switch
－
(1) Installing the power switch
Fix power switch 1 under the machine table with
wood screws 2 .
Fix the cable with staples 3 supplied with the machine
as accessories in accordance with the forms of use.
* Five staples 3 including the staple for fixing the
operation panel cable are supplied as accessories.
1. Never use under the wrong volt-
age and phase.
2. When changing the voltage, refer
to the item of "!.[7]-10. Changing
the voltage of 100 / 200V" p.36.
Power source cord
Power source cord
5
－
AC200 V
Brown
AC220 V
Light AC230 V
blue AC240 V
Green/
GND
Yellow
White
AC200 V
Black
AC220 V
AC240 V
Red
G r e e n /
GND
Yellow