JUKI LK-1901AN Instruction Manual page 46

Indication Function
Counter operation
Selection of pedal
Selection of start pedal
Optional pedal  operation
Optional pedal 2 operation
Height of work clamp foot at
the time of 2-step stroke
Selection of base point of pat-
tern enlargement/reduction
Sewing machine operation can be
stopped with panel key (clear key).
Buzzer sound can be prohib-
ited.
Number of stitches that needle
thread clamp releases is set.
Clamping timing of needle
thread clamp can be delayed.
Needle thread clamp control
can be prohibited.
Feed timing is selected.
When stitches are not well-
tightened, set the value in "–"
direction.
State of work clamp foot after
completion of sewing can be
selected.
Execution of origin retrieval
every time after completion
of sewing can be performed.
(Except cycle stitching)
Setting of origin retrieval in
cycle stitching can be set.
Setting range State when delivered
0 : P r o d u c t i o n c o u n t e r
(adding)
 : Bobbin thread counter
(subtracting)
0 : Standard pedal
 : Standard pedal (2-step
stroke)
2 : Optional pedal
3 : Optional pedal (2-step
stroke)
0 : Standard pedal
 : Optional pedal
0 : OFF when depressing
pedal again
 : OFF when detaching
from pedal
0 : OFF when depressing
pedal again
 : OFF when detaching
from pedal
50 to 90
0 : origin
 : Sewing start point
0 : Ineffective
 : Panel reset key
2 : External switch
0 : Without buzzer sound
 : Panel operation sound
2 : Panel operation sound
+ error sound
 to 7 stitches
-0 to 0
0 : Normal
 : Prohibited
-8 to 6
0 : Work clamp foot goes
up after moving at the
sewing start
 : Work clamp foot goes
up immediately after
the end of sewing.
2 : Work clamp foot goes
up by pedal operation
a f t e r m o v i n g a t t h e
sewing start.
0 : Without origin retrieval
 : With origin retrieval
0 : Without origin retrieval
 : Every time  pattern is
completed
2 : Every time  cycle is
completed
43
－ －
Remarks
0
0
0
0
0
70 Height is lowered when the
set value is increased.
0
0
2
2
0 Timing is delayed in "-" direc-
tion.
0 Misapplication of panel is pro-
tected. For LK-903AN, set to
"".
2 Setting on excessive "–" side
m a y c a u s e n e e d l e b r e a k-
age. Be careful when sewing
heavy-weight material.
 For LK-903AN/BR35, set to
"0".
0
0