1. Installing The Motor Cover - JUKI LK-1901AN Instruction Manual

2
C
B
1
A
How to lock the cord clamp
1 Lightly press the corner of clamp.
(Cord clamp is locked with a click.)
11. Installing the motor cover
1
1
2
Clamp
1
) Take care so that the cord is not caught between
the rear cover and the electrical box main body,
close the rear cover while pressing section A on
the lower side of the rear cover, and tighten four
screws 1 .
2) Lower downward the cord located on the side of
the control box and cord presser plate C in the
push hole B, press the cord and tighten screws 2 .
How to remove the cord clamp
1
Install motor cover 1 on the machine main unit with
screws supplied with the machine as accessories.
0
－ －
1 Lightly pressing
2 Pull down the clamp.
3 The clamp goes up.
2
3
1