JUKI LK-1901AN Instruction Manual page 42

2) Press key in the state that memory
switch No.  is indicated to make the sewing
LED light up. The contents of memory switch
No.  (max. sewing speed limitation value of
the sewing machine) are indicated.
3) Set "800" with
4) Register the value with
5) Press key to return to the normal state.
The sewing machine speed in the normal state cannot be increased more than the value
which has been set here.
(2) Setting the soft start speed at the sewing start
The speed of the first stitch to the fifth stitch at the sewing start can be set in a unit of 100 sti/min. Two
kinds of settings, in case of with needle thread clamp and of without needle thread clamp can be per-
formed. (See "!.[8] -3. Table of functions of the memory switch" p.42.)
In case of with needle thread clamp Unit : sti/min
st stitch
2nd stitch
3rd stitch
4th stitch
5th stitch
For the max. sewing speed, the memory switch No. 1 (max. sewing speed limitation) has
priority.
Setting example : In case of with needle thread clamp, the speed is changed as follows.
st stitch from ,500 to ,000 sti/min and 2nd stitch from 3,200 to 2,000 sti/min
) Press key in the state that the sewing
LED is put out.
2) Indicate memory switch No. 2 with
key.
Here, set the sewing speed of the first stitch.
3) Press key. The sewing LED lights up
and the set value of the first stitch is indicated.
or key.
key. Sewing LED goes off.
State when delivered
500
3200
3200
3200
3200
or
－
e
e
Setting range
400 to 500
400 to 3200
400 to 3200
400 to 3200
400 to 3200
e
e
e
39
－