JUKI LK-1901AN Instruction Manual page 21

(5) Setting of the max. sewing speed limitation
h
(6) Setting the thread tension
h
(7) Finish of setting
e
* When key is pressed, the set values of pattern No., X/Y scale, etc. are memorized.
* If key is pressed, you can make sure of the respective setting items again. However, the items
can not be changed in the state that the SEWING LED is lit up.
* When key is pressed, the READY LED goes off. Set values of the respective items can be changed.
* Thread tension can be changed even when the sewing LED lights up. Thread tension can be mom-
orized with the start switch as well.
* Use the machine after confirming the pattern No. When
cated "0" (state at the time of delivery), error display E-0 appears. At this time, re-set the pattern No.
When turning OFF the power without pressing
X/Y scale, number of max. rotation, and thread tension are not memorized.
) Press the
.
2) Press or
ting of 400 sti/min)
) Press key to indicate the item "THREAD
TENSION" .
2) Press or
200 can be set.)
) Press the
2) After the work clamp feet have moved and gone
up, the sewing LED lights up, and the sewing is
ready.
When the presser is raised, be careful that
fingers are not caught in the presser since
the presser moves after having lowered.
key is pressed while pattern No. is indi-
key, the set values of pattern No.,
8
－ －
key to indicate the item "Speed"
key to indicate "400". (Set-
key to indicate "50". (0 to
key.